lead4pass has updated the latest C9510-401 dumps

lead4pass has updated IBM WebSphere Application Server Network Deployment V8.5.5 and Liberty Profile, System Administration – C9510-401 dumps, C9510-401 dumps contain two modes PDF and VCE, choose anyone to help you pass the exam easily! All exam questions are actually valid and verified by IBM experts. C9510-401 belongs to the Cybersecurity Technical Certification exam category, and passing the exam will increase your professional worth.
Now, get the latest C9510-401 dumps from Lead4Pass: https://www.leads4pass.com/c9510-401.html (Total Questions: 73 Q&A).

The most important thing is for Lead4pass to share part of the IBM C9510-401 exam PDF for free::

Google Drive: https://drive.google.com/file/d/1Y_pCRb-1CMYyfTV5w9g0Nq1szrABB-kt/view?usp=sharing

IBM C9510-401 Exam Questions Online Test

Online test to verify the strength, and finally, verify the answer at the end of the article


A system administrator needs to install WebSphere Application Server using response files, so that a silent install can
be done. The administrator has ensured that all required prerequisites have already been installed and, has downloaded and expanded the required WebSphere Application Server installation files.
What can the administrator run to install the product?

A. install –options responsefile.xml -silent
B. install –acceptLicense –options responsefile.xml -silent
C. imcl –acceptLicense input responsefile.xml –log logfile.txt
D. IBMIM –acceptLicense –input responsefile.xml –log logfile.txt

Example of the use of the response files to install the product. imcl.exe -acceptLicense input
C:\temp\keyring_response_file.xml -log C:\temp\keyring_log.xml



A WebSphere Application Server cell was configured with a deployment manager node and a custom node. An operator manually changed some configuration files in the custom node, and the node became out of synch with the master repository.
The system administrator used the Synchronize button in the system administration session of the Integrated Solutions
Console (ISC) to try to resynchronize the node, but the node remained out of sync.
What should the administrator do to fix it?

A. Use the Full Resynchronize button.
B. Invoke “sync” operation on NodeSync MBean.
C. Recreate the custom profile with the same name without deleting the node.
D. Manually copy all the deployment manager configuration files to the custom node.

Select “Full Resynchronize” in the console.
References: https://www-01.ibm.com/support/docview.wss?uid=swg21233075



A newly deployed application has authorization errors when invoking EJB methods from a servlet. An additional review
indicates that users are authenticated, but do not have the correct authorization.
How can a system administrator fix the issue ensuring only authorized access?

A. Using the Integrated Solutions Console (ISC), map all security roles to the special subject Everyone.

B. Using the Integrated Solutions Console (ISC), map the security roles that are still not mapped to groups in the correct user registry.

C. Edit the application using an assembly tool to add a security constraint for the servlet and reinstall the application.

D. Edit the application using an assembly tool to remove the security constraint defined for the servlet and reinstall the



A system administrator needs to configure a JDBC provider and a data source for an application in a clustered
environment. The administrator also needs to copy the JDBC drivers from the database server to the application server
How can the administrator meet these requirements?

A. Create a JDBC provider and the data source in the cluster scope.Copy the driver to all nodes.Set the environment
variable at the node level to the driver\\’s path.

B. Create a JDBC provider in the server scope and the data source in the node scope.Copy the driver to all application
servers.Set the environment variable at the node level to the driver\\’s path.

C. Create a JDBC provider in the node scope and the data source in the cell scope.Copy the driver to the deployment
manager.Set the environment variable at the server level to point to the deployment manager path.

D. Create a JDBC provider in the application scope and the data source in the server scope.Copy the driver to all
application server directories.Set the environment variable in each JVM to the driver\\’s path.



Which of the following comprises an initial Liberty profile server process?

A. A single JVM, the Liberty kernel, and feature manager.
B. A single JVM, and OSGI framework and an object request broker.
C. an OSGI framework, a web container and an EJB container.
D. AN administrative agent, the Liberty kernel and shared libraries.

The server process comprises a single JVM, the Liberty kernel, and any number of optional features.
References: https://www.ibm.com/support/knowledgecenter/SSEQTP_8.5.5/com.ibm.websphere.wlp.do c/ae/cwlp_about.html



A system administrator ran the backup Config command to backup the configuration using the -nostop option. The
administrator changed the properties for the service integration environment by modifying the sib.properties file. During testing the administrator noticed Service Integration Bus related errors and wanted to restore the service integration environment. The administrator used the restore config command, but the tuning properties for the service integration environment were not restored.
How can the administrator prevent this issue?

A. Use full repository checkpoints for both the backup and the restore.
B. Use the restore config command with -nostop for the restore.
C. Use the manage profiles command for both the backup and the restore.
D. Use the backup config command without -nostop for the backup.
E. Use the restore config command without -nostop for the restore.



A system administrator has deployed web applications to a clustered environment where database session persistence
is configured. The administrator needs to improve the response time and the throughput.
How can the system administrator do this?

A. Disable server affinity.
B. Configure dynamic caching.
C. Configure a load balancer to spread work between existing web servers.
D. Tune the database session persistence to optimize for failover.

The dynamic cache service improves performance by caching the output of servlets, commands, and JavaServer Pages
(JSP) files. WebSphere Application Server consolidates several caching activities, including servlets, web services, and
WebSphere commands, into one service called the dynamic cache. These caching activities work together to improve
application performance and share many configuration parameters that are set in an application server\\’s dynamic
cache service.
References: WebSphere Application Server V8.5 Administration and Configuration Guide for the Full Profile (July 2013),
page 512



A system administrator needs to view the list of certificates for unmanaged web server located on a remote
How should the administrator do this?

A. View the plugin-cfg.xml
B. Look at the SSL configuration in the httpd.conf
C. Use iKeyman to view the keyring.
D. Use the administrative console to check the content of the cell default keystore.

You do not have a secure network connection until you have created a key for secure network communications and
received a certificate from a certificate authority (CA) who is designated as a trusted CA on your server. Use IKEYMAN
to create the key database file, public-private key pair, and certificate request. After you receive the CA-signed
certificate, use IKEYMAN to receive the certificate into the key database where you created the original certificate
References: http://www-01.ibm.com/software/webservers/httpservers/doc/v10/ibm/9atikeyu.htm



A web application has a configured session timeout of eight hours and a default LTPA token timeout of two hours. After every two hours, the users have to log in again from their HTTP browser. The system administrator is required to make configuration changed so users only have to log in once, while keeping the above mentioned timeouts the same. The authentication mechanism available is Kerberos.
How should the administrator do this?

A. Configure the SIP digest authentication.
B. Configure the SPNEGO Web or SPNEGO TAI.
C. Enable Session Management Security Integration.
D. Ensure Web Inbound security attribute propagation is enabled.

In WebSphere Application Server Version 6.1, a trust association interceptor (TAI) that uses the Simple and Protected
GSS-API Negotiation Mechanism (SPNEGO) to securely negotiate and authenticate HTTP requests for secured
resources was introduced. This function was deprecated In WebSphere Application Server 7.0. SPNEGO web
authentication has taken its place to provide dynamic reload of the SPNEGO filters and to enable fallback to the
application login method.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/csec_ssovo.html



Within a WebSphere Application Server Network Deployment cell, a system administrator needs to write a script to
determine if a particular server is stopped. It is important that the wsadmin script explicitly return a status of stopped as opposed to just failing.
What wsadmin object should the administrator use to write this script?

A. AdminApp
B. AdminTask
C. AdminConfig
D. AdminControl

Use the AdminControl object to invoke operational commands that manage objects for the application server. Many of
the AdminControl commands have multiple signatures so that they can either invoke in a raw mode using parameters
that are specified by Java Management Extensions (JMX), or by using strings for parameters. In addition to operational
commands, the AdminControl object supports some utility commands for tracing, reconnecting with a server, and
converting data types.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/rxml_admincontrol.html



A system administrator has created a wsadmin script with several steps to install and configure an application and some resources in a WebSphere Application Server process. The script executed but the application was not installed
successfully. The administrator suspects that the script has problems.
How can the administrator test and debug the script?

A. In WebSphere Application Server Developer Tools for Eclipse, right click on the script file and select Validate from
context menu.

B. Execute the script using the wsadmin with the option -conntype NONE and monitor the
commandAssistanceJythonCommands.log file.

C. Use WebSphere Application Server Developer Tools for Eclipse in the debug perspective connected to the server
and execute the script step by step.

D. Run the script using wsadmin with these parameters: -lang jython -javaoption “-Xdebug” and then execute the
logViewer command with the option -listInstances



A system administrator has created a Python script that will run in WebSphere Network cell where administrative
security is enabled. This script is named doUpdate.py and will be run by using the following:
wsadmin -connType RMI -f doUpdate.py
How can the administrator suppress a user/password prompt from appearing when this script is run?
Set the user and password in the:

A. sas.client.props file.
B. ssl.client.props file.
C. soap.client.props file.
D. wsadmin.properties file.



A system administrator has been asked to uninstall an application from a cluster running in a WebSphere Application
Server Network Deployment cell. This application was installed from the Integrated Solutions Console (ISC). The
monitored directory for the cluster is .
What step(s) can the administrator perform to uninstall the application?

A. Delete the application file from .
B. Stop the running cluster.Delete the application file from .
C. Stop the running cluster.Copy the application file to .Delete the application file from .
D. Create a properties file to describe the deletion of the application file.Copy the properties file to .

You can use application properties files to install enterprise application files on a server or cluster, update
deployed applications or modules, or uninstall deployed applications or modules. Drag or copy a properties
file to a monitored directory and the product performs the deployment action described in the properties
file. The enterprise application files that you can install, update, or uninstall using properties files include
enterprise archive (EAR), web archive (WAR), Java archive (JAR), and Session Initiation Protocol (SIP)
archive (SAR) files.
https://www.ibm.com/support/knowledgecenter/SSAW57_8.5.5/com.ibm.websphere.nd.mul tiplatform.doc/ae/trun_app_install_dragdrop_prop.html

Verify the answer:


More IBM C9510-401 exam questions -> Use VCE and PDF to learn Lead4Pass C9510-401 dumps to ensure that the first exam is successfully passed: https://www.leads4pass.com/c9510-401.html (Total Questions: 73 Q&A).

Thanks for reading!