Cisco 500-220 is a very popular exam. You can find us in Google Search “500-220 dumps”, “500-220 exam dumps”, “500-220 certification dumps”, etc. Passing the Lead4Pass 500-220 exam dumps can help
You easily pass the exam, lead4pass has a pass rate of over 99% and has the latest authoritative exam experts. You can find the perfect exam policy in the Lead4Pass policy. Lead4pass 500-220 dumps contains: PDF and VCE
You can choose between the two modes. Lead4pass 500-220 certification dumps https://www.leads4pass.com/500-220.html (PDF+VCE).
Next, I will share free Cisco 500-220 certification dumps, you can take the exam test online. You can also get a free Cisco 500-220 Exam PDF Collection.
Cisco 500-220 Exam PDF Collection
Google Drive:
https://drive.google.com/file/d/1zuphkVYdiwzs3mfHIT6gPu6w_zEX6Q-0/view?usp=sharing
https://drive.google.com/file/d/1_tDwsiwBZfiYZZ0KVePOOqXT2X4ZhZI1/view?usp=sharing
Cisco 500-220 certification exam questions
Exam answers are announced at the end of the article
Question 1:
Refer to the exhibit. Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.
B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
C. WebEx traffic will prefer WAN 2 as long as it is up.
D. WebEx traffic will be load-balanced between both active WAN links.
Question 2:
For which two reasons can an organization become “Out of License”? (Choose two.)
A. licenses that are in the wrong network
B. more hardware devices than device licenses
C. expired device license
D. licenses that do not match the serial numbers in the organization
E. MR licenses that do not match the MR models in the organization
Reference: https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FAQs
Question 3:
Refer to the exhibit. Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
A. Change the primary uplink to “none”.
B. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
C. Enable load balancing.
D. Set the speed of the cellular uplink to zero.
E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
Question 4:
Which Cisco Meraki best practice method preserves complete historical network event logs?
A. Configuring the preserved event number to maximize logging.
B. Configuring the preserved event period to unlimited.
C. Configuring a syslog server for the network.
D. Configuring Dashboard logging to preserve only certain event types.
Question 5:
Which design requirement is met by implementing syslog versus SNMP?
A. when automation capabilities are needed
B. when proactive alerts for critical events must be generated
C. when organization-wide information must be collected
D. when information such as flows and client connectivity must be gathered
Question 6:
Refer to the exhibit. The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
A. Add a deny any/any firewall rule to the end of the firewall rules.
B. Remove the connection from Internet 1.
C. Physically disconnect all LAN ports.
D. Configure the MX appliance to Routed mode on the Addressing and VLANS page.
Question 7:
Refer to the exhibit. A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4. What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10.128.124.62) is the next hop.
B. Not enough detail is available to determine the next hop.
C. The packet is stopped.
D. The Auto VPN peer “Store 1532 ?appliance” is the next hop.
Question 8:
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager. Which outcome occurs when a user attempts to remove the “Meraki Management” profile on an iPad?
A. The “Meraki Management” profile cannot be removed.
B. The “Meraki Management” profile is removed and then pushed automatically by Systems Manager.
C. The “Meraki Management” profile is removed. All the profiles that Systems Manager pushed are also removed.
D. The “Meraki Management” profile is removed. All the profiles Systems Manager pushed remain.
Question 9:
Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
A. intrusion prevention
B. site-to-site VPN
C. secondary uplinks
D. DHCP
E. high availability
Question 10:
Refer to the exhibit. What are the Loss and Average Latency statistics based on?
A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security and SD-WAN > Firewall page
C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security and SD-WAN > SD-WAN and Traffic Shaping page
D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
Question 11:
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
A. Renew the Dashboard license.
B. License a network.
C. License more devices.
D. Call Meraki support.
E. Wait for the devices to auto-renew.
Question 12:
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
A. OS updates
B. Send notification
C. Selective wipe
D. Screenshot
E. Remote Desktop
Reference: https://documentation.meraki.com/SM/Other_Topics/Systems_Manager_FAQ
Question 13:
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B. Peers contact the VPN registry at UDP port 9350.
C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D. Peers contact the VPN registry at TCP port 9350.
E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Question 14:
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
A. The configuration change in the bound network is combined with the template configuration inside the template.
B. The more restrictive configuration is preferred.
C. The configuration change in the bound network overrides the template configuration.
D. The template configuration overrides the configuration change in the bound network.
Question 15:
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based on client count, how many APs (rounded to the nearest whole number) are needed?
A. 26
B. 28
C. 30
D. 32
Publish the answer
Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
B | BC | BC | A | D | C | B | C | AB | B | AC | CE | BC | A | C |
All free content comes from Lead4Pass for sharing, complete 500-220 exam questions and answers to help you successfully pass the exam: https://www.leads4pass.com/500-220.html
Cisco 500-220 Exam PDF
Google Drive:
https://drive.google.com/file/d/13ND6PIliZUc1X5H6c9xLNEClRkQ1rmAr/view?usp=sharing
https://drive.google.com/file/d/1_tDwsiwBZfiYZZ0KVePOOqXT2X4ZhZI1/view?usp=sharing
Free exam questions and answers, free exam PDFs, can help you improve your ability. But wanting to pass the Cisco 500-220 exam is not an easy task. Being able to take the exam for the first time and successfully obtain certification is something that every participant in the exam dreams of! Lead4Pass Cisco 500-220 certification dumps can guarantee a pass rate of more than 99%. And a safe policy guarantee. Finally, good luck is always with you! Please follow and share if you like it.
PS. Cisco has always been the most popular certification exam and contains many series of the exam content. At https://www.vcecert.com/cisco-dumps/, we shared free dumps of all series