[2025] New Cisco 300-715 SISE dumps update actual exam questions

Many candidates face two main challenges when preparing for the 300-715 SISE exam: unclear trends in recent exam questions and uncertainty about which study resources are truly up to date. Instead of spending hours searching online, focusing on updated practice materials can significantly improve your accuracy.

What has changed in the latest 300-715 exam version?

From late 2024 to early 2025, Cisco updated several areas in the 300-715 SISE exam:

• Integration with external identity sources (Azure AD, Secure LDAP)
• Policy Set priority and matching logic
• Posture assessment and compliance configurations
• Guest and BYOD portal authorization strategies
• DNA Center and ISE integration
• TrustSec and SGT enforcement validation

Materials that don’t cover these updates may leave you unprepared for the actual test.

How to combine official resources with 300-715 Practice questions

1. Blueprint – define exam scope
2. Official docs/lab videos – understand ISE configuration and workflow
3. Practice questions – Get the complete Cisco 300-715 dumps with PDF and VCE: https://www.leads4pass.com/300-715.html (420 Q&A dumps PDF+VCE) – learn question patterns and scenarios
4. Error review – improve accuracy and logic understanding

30-day Exam Preparation Plan (Detailed)

Week	Focus	Daily Task	Notes
1	Concepts & core modules	2–3h reading & diagrams	ISE architecture, Authentication, Authorization
2	First round practice	50–70 questions/day	Mark unfamiliar types, identify high-frequency topics
3	Scenario-based practice & error review	40–60 questions/day	Focus on difficult modules, review logic tables
4	Simulation & intensive testing	60 questions/day + review	Reduce error rate <15%, finalize weak areas

What if You fail the Cisco 300-715 exam?

At Leads4Pass, we boast a 99%+ pass rate—that’s not just a claim, it’s our track record. Simply dive into our latest exam dumps with focused study, and passing will feel effortless. Still feeling unsure? Visit our policy page for a clear breakdown of our failure protection plan, including a full refund guarantee if needed.

Got questions? Reach out to our customer service team via email or chat—we’ll respond within 24 hours to put your mind at ease. Now’s the time: Schedule your exam and step up!

Cisco 300-715 Practical Exercises Section (Reserved for Latest Exam Questions)

Number of exam questions	Related
15(Free)	Cisco CCNP

Question 1:

Refer to the exhibit.

An administrator is manually adding a device to a Cisco ISE identity group to ensure that it is able to access the network when needed without authentication. Upon testing, the administrator notices that the device never hits the correct authorization policy line using the condition EndPoints-LogicalProfile EQUALS static_list. Why is this occurring?

A. The dynamic logical profile is overriding the statically assigned profile

B. The device is changing identity groups after profiling instead ot remaining static

C. The logical profile is being statically assigned instead of the identity group

D. The identity group is being assigned instead of the logical profile

Correct Answer: C

Question 2:

A security engineer has a new TrustSec projct and must create a few static security group tag classifications as proof of concept. Which two classifications must the engineer configure? (Choose two.)

A. switch ID

B. MAC address

C. VLAN

D. user ID

E. interface

Correct Answer: CE

Question 3:

Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)

A. NetFlow

B. SNMP

C. HTTP

D. DHCP

E. RADIUS

Correct Answer: DE

Explanation:

Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints.

For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data.

The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.

https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html

Question 4:

A network engineer must create a guest portal for wireless guests on Cisco ISE. The guest users must not be able to create accounts; however, the portal should require a username and password to connect. Which portal type must be created in Cisco ISE to meet the requirements?

A. Custom Guest Portal

B. Sponsored Guest Access

C. Self Registered Guest Access

D. Hotspot Guest Access

Correct Answer: B

Question 5:

What does MAB stand for?

A. MAC Address Binding

B. MAC Authorization Binding

C. MAC Authorization Bypass

D. MAC Authentication Bypass

Correct Answer: D

Question 6:

Which profiling probe collects the user-agent string?

A. DHCP

B. AD

C. HTTP

D. NMAP

Correct Answer: C

Question 7:

A client with MAC address 04:77:10:14:67:AB connects to the network. The client does not support 802.1X. Which setting must be enabled in the Allowed Authentication Protocols list in your Authentication Policy for Cisco ISE Server to support MAB authentication for this MAC address?

A. Process Host Lookup

B. EAP-FAST

C. EAP-TTLS

D. MS-CHAPv2

Correct Answer: A

Question 8:

An engineer builds a five-node distributed Cisco ISE deployment. The first two deployed nodes are responsible for the primary and secondary administration and monitoring personas.

Which persona configuration is necessary to have the remaining three Cisco ISE nodes serve as dedicated nodes in the Cisco ISE cube that is responsible only for handling the RADIUS and TACACS+ authentication requests, identity lookups, and policy evaluation?

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: B

Question 9:

Which Cisco ISE deployment model is recommended for an enterprise that has over 50,000 concurrent active endpoints?

A. large deployment with fully distributed nodes running all personas

B. medium deployment with primary and secondary PAN/MnT/pxGrid nodes with shared PSNs

C. medium deployment with primary and secondary PAN/MnT/pxGrid nodes with dedicated PSNs

D. small deployment with one primary and one secondary node running all personas

Correct Answer: C

Question 10:

An engineer is configuring web authentication and needs to allow specific protocols to permit DNS traffic. Which type of access list should be used for this configuration?

A. reflexive ACL

B. extended ACL

C. standard ACL

D. numbered ACL

Correct Answer: B

Question 11:

Which two events trigger a CoA for an endpoint when CoA is enabled globally for ReAuth? (Choose two.)

A. endpoint marked as lost in My Devices Portal

B. addition of endpoint to My Devices Portal

C. endpoint profile transition from Apple-Device to Apple-iPhone

D. endpoint profile transition from Unknown to Windows 10-Workstation

E. updating of endpoint dACL.

Correct Answer: CD

Question 12:

An organization wants to standardize the 802 1X configuration on their switches and remove static ACLs on the switch ports while allowing Cisco ISE to communicate to the switch what access to provide What must be configured to accomplish this task?

A. security group tag within the authorization policy

B. extended access-list on the switch for the client

C. port security on the switch based on the client\’s information

D. dynamic access list within the authorization profile

Correct Answer: D

https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_sga_pol.html#

Question 13:

An organization is adding new profiling probes to the system to improve profiling on Oseo ISE The probes must support a common network management protocol to receive information about the endpoints and the ports to which they are connected

What must be configured on the network device to accomplish this goal?

A. ARP

B. SNMP

C. WCCP

D. ICMP

Correct Answer: B

https://community.cisco.com/t5/security-documents/ise-profiling-design-guide/ta-p/3739456#toc-hId-790343135

Question 14:

DRAG DROP

Drag the descriptions on the left onto the components of 802.1X on the right.

Select and Place:

Correct Answer:

Cisco ISE Fundamentals

Question 15:

A network administrator has just added a front desk receptionist account to the Cisco ISE Guest Service sponsor group. Using the Cisco ISE Guest Sponsor Portal, which guest services can the receptionist provide?

A. Authenticate guest users to Cisco ISE.

B. Keep track of guest user activities.

C. Create and manage guest user accounts.

D. Configure authorization setting for guest users.

Correct Answer: C

…

Common Mistakes & High-Frequency Pitfalls

• Misreading long question stems
• Omitting selections in multiple-choice questions
• Confusing Policy Set priority logic
• Misunderstanding identity source integration
• Mismanaging Guest/BYOD portal workflows

Tip: Review errors by module, not just by question, to strengthen understanding of logic relationships.

Top 5 Modules to Master

1. Policy Sets
2. Authentication/Authorization flows
3. External Identity Source integration
4. Guest/BYOD/Wired/Wireless access control
5. Posture & Profiling

Focus on these modules—they account for over 70% of scenario questions.

7-Day Final Sprint Strategy

• Focus on high-frequency questions (100/day)
• Consolidate errors by module
• Repeat scenario questions for reinforcement
• Memorize patterns and key triggers

Three-Step Approach for Passing

1. First round: Quick review without memorizing
2. Second round: Understand, categorize, highlight key points
3. Third round: Focus on errors and high-frequency questions

Avoid pitfalls:

• Don’t blindly memorize; cross-check multiple sources
• Always review explanations; don’t skip scenario-based questions

Conclusion

Updated 300-715 practice resources (https://www.leads4pass.com/300-715.html), when combined with real-world understanding and structured preparation, are powerful tools. They help candidates identify high-frequency topics, understand question patterns, improve scenario reasoning, save preparation time, and maximize passing probability. Properly used, pass rates can increase from 50% to over 80%.

FAQs

Q1: How often are Leads4Pass 300-715 study resources updated?
Every 1 months typically.

Q2: Can someone with no deployment experience understand the questions?
Yes, especially with detailed explanations and highlighted keywords.

Q3: Is a single resource enough?
Focus on coverage, explanation quality, and recency over sheer volume.

Q4: Can I memorize answers only?
Not recommended; scenario questions require logic comprehension.

Q5: Are real exam questions identical to practice questions?
No, but core concepts and topics are consistent.