The latest CCNP Collaboration 350-801 Dumps 2023 is the best material for you to prepare for the exam on Implementing and Operating Cisco Collaboration Core Technologies.
Become a Lead4Pass member, download 2023 350-801 Dumps: https://www.leads4pass.com/350-801.html, including 351 exam questions and answers, exam questions and answers from real exam room experience to pass the Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) certification exam, and enjoy 365 days of free update features.
Read a portion of the 2023 350-801 dumps exam questions and answers
| Number of exam questions | Exam name | Exam code |
| 15 | Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) | 350-801 |
Question 1:
Refer to the exhibit.
An administrator configured a codec preference list with 0,122 and ILBC codecs. Which change must the administrator make in the dial-peer section of the configuration to use this list?
A. add voice-codecs 20
B. add session codec 20
C. add codec preference 20
D. add voice-class codec 20
Correct Answer: D
Question 2:
Refer to the exhibit.
Cisco Unified Border Element is attempting to establish a call with Subscriber 1, but the call fails. Cisco Unified Border Element then retries the same call with Subscriber 2, and the call proceeds normally. Which action resolves the issue?
A. Verify that the Run On All Active Unified CM Nodes checkbox is enabled.
B. Verify that the correct calling search space is selected for the Inbound Calls section.
C. Verify that the Significant Digits field for Inbound Calls is set to All.
D. Verify that the PSTN Access checkbox is enabled.
Correct Answer: B
Question 3:
Where is the default for Maximum Session Bit Rate for a region configured?
A. Service Parameter Configuration
B. Enterprise Phone Configuration
C. Enterprise Parameters Configuration
D. Region Configuration
Correct Answer: D
Question 4:
Refer to the exhibit.
An administrator must fix the SRV records to ensure that server1.sample.com is always contacted first from the three servers. Which solution should apply to resolve this issue?
A. Priority = 10, Weight = 5
B. Priority = 100, Weight = 90
C. Priority = 10, Weight = 10
D. Priority = 5, Weight = 70
Correct Answer: D
Question 5:
An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net. direct-media call shows two 180 Ringing and two 11 BYE messages.
Why are there multiples of each message type in the trace?
A. The source phone sends a 180 Ringing signal to the Cisco UCM. which sends a 180 Ringing signal to the destination phone. The same process applies to 11 BYE messages.
B. The source phone must signal to the destination phone that it is ringing, and the destination phone signals back with a 180 Ringing message. The same process applies to 11 BYE messages.
C. The calls have an MTP in the call path due to different codec support. The calls are subsequently split into two call legs.
D. The destination phone signals back to the Cisco UCM that it is ringing, and the Cisco UCM signals back to the source phone.
Correct Answer: A
Question 6:
A customer has Cisco Unity Connections that are integrated with LDAP. As a Unity Connection administrator, you have received a request to change the first name of the VM user. Where must the change be performed?
A. Cisco Unity Connection
B. Cisco Unified Communications Manager end user
C. Active Directory
D. Cisco IM and Presence
Correct Answer: C
Question 7:
Which configuration concept allows for the high availability of IM and Presence services in a UC environment?
A. IM and Presence subclusters (configured on Cisco UCM)
B. Presence Redundancy Groups (configured on Cisco Unified IM and Presence)
C. IM and Presence subclusters (configured on Cisco Unified IM and Presence)
D. Presence Redundancy Groups (configured on Cisco UCM)
Correct Answer: D
Question 8:
A Cisco Unity Connection administrator receives a name change request from a voice-mail user, whose Cisco Unity Connection user account was imported from Cisco Unified Communications Manager. What should the administrator do to execute this change?
A. Change the user data in the Cisco Unity Connection administration page, then use the Synch User page in the Cisco Unity Connection administration to push the change to Cisco Unified Communications Manager.
B. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in the Cisco Unity Connection administration to pull the changes from Cisco Unified CM.
C. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in the Cisco Unified CM administration to push the change to Cisco Unity Connection.
D. Change the user profile from Imported to Local on Cisco Unity Connection Administration, then edit the data locally on Cisco Unity Connection.
E. Change the user data in Cisco Unity Connection and Cisco Unified Communications Manager separately.
Correct Answer: B
As we can see users are getting synched from the call manager so we first have to change the details of the user on the call manager so that the user will synch the changes from the call manager.
Question 9:
The IP phones at a customer site do not pick an IP address from the DHCP. An engineer must temporarily disable LLDP on all ports of the switch to leave only CDP. Which two commands accomplish this task? (Choose two.)
A. Switch(config)# no lldp transmit
B. Switch# configure terminal
C. Switch# copy running-config startup-config
D. Switch(config)# no lldp run
E. Switch(config)# interface GigabitEthernet1/0/1
Correct Answer: BD
Question 10:
What is the most efficient way to configure a speed dial to number 1111 on multiple phones using the Self-Provisioning feature in Cisco UCM?
A. Configure each phone with the same DN and then configure a speed dial of 1111 on one of the phones manually by navigating to Devices>Phones and modifying the phone. This will automatically replicate to all the other phones.
B. Configure the phones with a phone button template that has speed dials then specify 1111 as a speed dial via BAT>Phones>Add/Update phones web page to specify the speed dial number after the phone is in Cisco UCM.
C. Configure a universal device template that has speed dials in the phone button configuration field, then allow the user to specify 1111 as a speed dial via the Cisco Unified Communications Self-Care Portal.
D. Configure a universal device template that has speed dials in the phone button configuration field, then specify 1111 as a speed dial by editing the speed dial within the universal device template.
Correct Answer: D
Question 11:
An engineer is implementing toll fraud prevention for incoming calls cluster-wide on cisco UCM. What is the first step to configure this feature?
A. Set service parameter \’Block OffNet to OffNet Transfer\’ to False
B. Configure blocking for inbound calls based on caller ID.
C. Set service parameter “System Remote Access Blocked Numbers\’ to True
D. Set service parameter \’Block OffNet To OffNet Transfer\’ to True
Correct Answer: A
Question 12:
Refer to the exhibit. Given this “debug ISDN q921” output, what is the problem with the PRI?
A. Layer 1 is down on the controller.
B. PRI does not have an IP address configured on the interface.
C. Nothing, the PRI is sending keepalives.
D. Layer 2 is down on the controller.
Correct Answer: D
Question 13:
An administrator has been asked to implement toll fraud prevention in Cisco UCM Which tool is used to begin this process?
A. Cisco UCM class of service
B. Cisco Unified Mobility
C. Cisco UCM Access Control Group restrictions
D. Cisco Unified Real-Time Monitoring Tool
Correct Answer: A
Question 14:
What is required when deploying co-resident VMs by using Cisco UCM?
A. Provide a guaranteed bandwidth of 10 Mbps.
B. Ensure that applications will perform QoS.
C. Avoid hardware oversubscription.
D. Deploy the VMs to a server running Cisco UCM.
Correct Answer: C
Question 15:
Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with the 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?
A. The engineer must activate the controller card on the voice gateway before configuring the device.
B. The engineer used a T1 interface but must use an E1 interface.
C. The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.
D. The engineer must manually revert the order of using the channels.
Correct Answer: A
…
CCNP Collaboration 350-801 Dumps 2023 contains 351 latest exam questions and answers, download 350-801 dumps: https://www.leads4pass.com/350-801.html, use
PDF and VCE Study Tools Practice complete exam questions and answers to ensure candidates succeed in the Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) certification exam.